Keyboard, mouse & tray reference
Every gesture, hotkey and tray entry on one page — the whole app without touching the mouse, if that is how you work. The palette's verbs are listed with the command palette.
Global hotkeys
| Keys | Action |
|---|---|
| Ctrl+Shift+F | Search everywhere — the search overlay (and the command palette / Inbox); pressed while the overlay is open, it closes it. |
| Ctrl+Shift+Space | Peek over — pickets temporarily above all windows (toggle). |
| Ctrl+Shift+D | Focus mode — hide everything except pinned pickets (toggle). |
| Ctrl+Shift+N | Quick capture — jot a note, saved to the desktop as
Note YYYY-MM-DD HH-MM.md and routed by your rules
(Ctrl+Enter saves, Esc closes and keeps
what you typed for next time). |
| Ctrl+Shift+PageDown / PageUp | Next saved page / Previous saved page — cycle the saved pages. Each press flashes the next page's name top-center; the page loads only when you stop for a beat, so browsing never loads every page it passes. Loads take the usual pre-change snapshot. |
| Ctrl+Shift+1…4 | Show/hide monitor 1 … 4 — one monitor's pickets (numbered left-to-right, same as the tray's Monitors submenu). Pinned pickets stay; any full show clears every monitor scope so nothing stays invisibly hidden. |
The bold name of each is the row it has in Settings → Desktop behavior → Global hotkeys, so the panel and this table can be read against each other.
Desktop gestures
| Gesture | Action |
|---|---|
| Double-click empty desktop | Hide / show all pickets (pinned ones stay). Opening a file by double-clicking an icon never triggers this. Can be switched off in Settings → Desktop behavior — the tray icon and tray menu still toggle either way. |
| Hover where a hidden picket sits (opt-in) | Hover reveal: that one picket fades back for as long as the cursor stays inside it. The others stay hidden, and crossing empty desktop reveals nothing. Never during Focus mode. Turn it on in Settings → Desktop behavior, or from the tray menu. |
| Left-click the tray icon | Hide / show all pickets — or peek-over instead, with Settings → Desktop behavior → “Tray icon click peeks instead of hiding” (opt-in). |
| Drag on empty desktop space | Draw a new picket. Can be switched off in Settings → Desktop behavior → “Drag on the desktop to draw a picket” — a drag is then only a selection, and the tray's New picket still works. |
Inside a picket
| Input | Action |
|---|---|
| Space | Preview the selected item (one item selected). |
| Ctrl+Z | Undo the last Picketdesk action — a move, an organize sweep, a
delete, a closed picket — 20 steps deep. In a text box (the search
box, a rename, a Settings field) it is that box's own undo. The chord is
deliberately not global — it would take Ctrl+Z away from
every other application — so it works in a picket window and in the
Settings window. When you organized from the tray or the palette and
nothing has focus, use tray → Undo last action, or type
undo in the Ctrl+Shift+F
palette. Same undo stack, three doors. |
| Ctrl+A / Delete / Esc | Select every item the grid draws (the tab on show; over 1,000 items, the page on screen) / recycle the whole cross-picket selection / clear selection — Esc first closes an empty search box or a rule suggestion, one per press. |
| Ctrl+C / Ctrl+X | Copy / Cut the real files onto the Windows clipboard, across the whole cross-picket selection — paste them into Explorer, an email, a chat window, anywhere Windows takes a file paste. Nothing moves on disk until you paste, and a copy you never use costs nothing. Picketdesk un-hides the files at the moment the pasting application asks for them, so what arrives is an ordinary, visible file — and keeps them visible for as long as that copy is on the clipboard, so pasting it a second time somewhere else is just as safe. Cut raises a toast, because a picket draws its own icons and cannot ghost them the way Explorer does. |
| Ctrl+M | Move to picket… — a small popover at the top
of the picket: type to filter picket names (the letters in order, so
prj finds Projects; recent destinations rank
first, then by name; at most eight rows), ↑/↓
pick, Enter moves the selection,
Shift+Enter bundles it into a new picket,
Esc closes. Works on cross-picket selections; it lists
regular pickets only, never the one you pressed it in. It waits for
the filing result: refused files stay selected and the popover stays
open for a retry. |
| Ctrl+Tab / Ctrl+Shift+Tab | Focus the next / previous picket in spatial
order; the landing picket flashes its frame. In-window only —
your browser keeps its tab switching. The palette's
go <picket> jumps by name from anywhere. |
| Ctrl+click · marquee drag | Multi-select (works across pickets; a plain click starts a new selection everywhere; a Ctrl+marquee adds the boxed items to the selection). A drag of a selected file carries the whole cross-picket selection. |
| Shift+F10 · Menu | Open the item menu from the keyboard. The same native menu right-click gives, opened at the selected tile rather than at the cursor — which for a keyboard gesture may be on another monitor. Tag, Add note, “Always move .ext files here”, Move to desktop, Open file location and Copy path have no other keyboard route. With nothing selected these keys open the picket menu. |
| Shift+click | Select the range from the last item you clicked — or the anchor a Shift+arrow run left — to the one you just clicked. Mouse and keyboard share the one anchor, so Shift+arrow then Shift+click grows the same run. Ctrl+Shift+click adds the range to what is already selected; with nothing selected it is a plain click, and it never starts a drag. |
| ↑ ↓ ← → · Home / End | Move the selection through the grid — up/down step a whole row, and the row width is read from the grid you can actually see. Shift extends the run from where it started; Home / End jump to the first / last item. With nothing selected, the first press lands on the first item. |
| Enter | Open everything in the selection, across every picket it spans. More than 15 items asks first (“Open N items”, the same line Explorer draws); dismissing the popup opens nothing. |
| F2 (or click-pause-click) | Rename inline (one item selected). |
| Start typing | Type-ahead: jump to the first item whose name starts with what you typed. |
| Tab onto a title-bar, tab, pager or banner button | That button takes the keys: Enter or Space presses it, and Shift+F10 on a tab opens the tab's menu (on the host's own tab, the picket menu). The grid keys above — Enter, the arrows, type-ahead, F2, Delete, Ctrl+A/C/X/M — wait until focus is back on a tile; Esc, Ctrl+Tab and Ctrl+Z work wherever focus is. A mouse click never leaves focus on those buttons, not even one you had reached with Tab, so after clicking a tab, the chevron or More › the grid keys work straight away. |
| Double-click the picket's title / the rest of its title bar | Rename the picket / roll it up. |
| Double-click a tab | Rename the tab. |
| Mouse wheel over the grid | Scroll when items overflow. |
F5, Shift+F5, Ctrl+R, Ctrl+Shift+R, Ctrl+F5 and a keyboard's Refresh key do nothing in any Picketdesk window: as the browser's reload keys they used to reload the window and lose whatever it held unsaved, such as typed Settings edits or a capture draft.
In the search overlay
| Input | Action |
|---|---|
| ↑ ↓ · Enter | Pick a result; Enter opens it (an app launches) and closes the overlay, or runs the palette verb typed in the box. |
| Tab | Complete the picket or page name a palette verb takes, with the first suggestion shown. |
| Esc | Close the overlay. |
Inbox triage (the overlay's Inbox button):
| Input | Action |
|---|---|
| ↑ ↓ | Move the highlight. |
| 1…9 | File the highlighted file into picket N — the first nine regular pickets (not tabs), numbered in the strip above the list. The number-row key marked with the digit counts with or without Shift, and so does the keypad with Num Lock on. |
| R | Remind me in 24 hours (the menu's Tomorrow). |
| Del | Recycle. |
| Enter | Open (the file stays in the list). |
| S | Skip: move the highlight to the next file. |
| Esc | Back to search. |
The digits, R and S are single keys: with Ctrl, Alt or the Windows key held they do nothing. In the Reminders list, ↑ ↓ pick, Enter opens the file, Del clears the reminder and Esc goes back to search. On a button reached with Tab, Enter and Space press that button; Esc still goes back.
The system tray menu
Picketdesk's home while running:
- Show/hide pickets
- New picket
- New smart picket ▸ — Images · Documents · Archives · Screenshots · New or changed today · New or changed this week (the same six the picket menu offers).
- Search everywhere (Ctrl+Shift+F — the entry shows the chord you actually have on the search hotkey, and none when you turned it off)
- Organize desktop now
- Undo last action — the same undo stack Ctrl+Z uses, reachable with nothing focused
- Settings…
- Save layout snapshot · Restore last snapshot
- Pages ▸ — every saved page, one click each; the list tracks saves, deletes and loads automatically, and ticks the page you last loaded
- Monitors ▸ — with two or more monitors only: show/hide the pickets on one screen (Ctrl+Shift+1…4 do the same)
- Reveal a hidden picket on hover ✓ — the same opt-in switch as Settings → Desktop behavior
- Start with Windows ✓ — greyed for a moment right after launch, while the logon task is looked up in the background. An unticked box would be a wrong answer on a machine where autostart is on; a disabled one honestly says “not known yet”.
- Refresh icons — re-extracts every icon Picketdesk
draws. Icons that live in the file (a folder's custom icon, an
.exe, a retargeted.lnk) refresh on their own when the file changes, and Picketdesk also refreshes when Windows broadcasts that file associations changed; this is the manual version for a new default app or icon pack that nothing announced. It also retries an icon Picketdesk had been skipping because it closed while drawing it on two launches in a row. - Restore hidden desktop files… (shows the count, logs every un-hide)
- Help and support… — opens Settings at Help & support: the version and build to quote in a report, the log folder and the support page
- Export logs… — one zip with
picket.log(both generations once it has rotated), your workspace and the machine facts, for a bug report - Quit Picketdesk — un-hides every file it hid and leaves a receipt on the desktop that lists them.
The Settings window
Tray → Settings… holds the configurable surface; the main panels are:
- Auto-sorting rules — full editor, auto-apply hours, scheduled sweeps, Suggest rules / AI suggest.
- Search index — ignore lists (folders/extensions), extra folders to index.
- Desktop pages and virtual desktop pages (bind/unbind).
- Duplicates — byte-identical groups across everything indexed (desktop, portal folders and extra folders; a private picket's files left out), found by size, then a head/middle/tail sample, then a full content hash; per-copy Recycle; a copy stays listed when the Recycle Bin took nothing (a No to Windows' own confirmation, a locked file). Cloud placeholders are skipped, so the finder never downloads a file to compare it. The scan shows Scanning… with a Stop button, gives up when you close the settings window, and stops itself after 2 GB read or 50 groups — saying "Scan stopped early — results may be incomplete" when it does.
- Dead shortcuts —
.lnkfiles pointing nowhere, anywhere indexed (a private picket's left out); one search checks at most 2,000 shortcuts, lists at most 100 and returns what it has after 10 seconds, saying "Scan stopped early — results may be incomplete" when it stops at any of those. Per-item Recycle, which keeps the row when nothing was recycled. A shortcut is only called dead when its target's drive is connected and the target is not; targets on an unplugged, locked or network drive are listed apart as "not checked", with no Recycle button and their existence never probed — the drive alone decides. Each shortcut is resolved the way Explorer resolves it first — a read of the.lnk, capped at 500 ms, so an offline share cannot hold the scan up — so one whose target simply moved on the same drive — which Windows repairs silently when you open it — is reported at its new location and not called dead. The.lnkfiles themselves are never rewritten by the scan. - Custom action zones —
%fcommand templates. - Desktop behavior — auto-fade pickets after N idle seconds (mouse-over restores; pinned pickets never fade), “Double-click the desktop to hide and show all pickets” (on by default; off means only the tray toggles them), “Drag on the desktop to draw a picket” (on by default; off means a desktop drag is only a selection, with no “Create picket” chip), and Reduce motion — turns off in-picket animation (icon fade-in, re-sort gliding, the page-switch crossfade); Windows' own “Show animations” preference is honored regardless. Also “Reveal a hidden picket on hover” (opt-in, off by default — hovering where a hidden picket sits brings that one back while the cursor is inside it; there is a matching tray checkbox) and “Tray icon click peeks instead of hiding” (opt-in).
- Time machine, Move configuration to another folder…,
Quit backups (Open backups folder),
Export/Import backup, Refresh icons,
reminder
.icsexport, “What changed”, and Align free icons now. - Help & support — where tray →
Help and support… opens Settings: the version and
build line to quote in a report, Export logs…,
Open log folder (the folder holding
picket.log, which Explorer hides), Support page and Update e-mails (the update e-mail sign-up). - Crash reports — the last section: the crash reports kept on this PC when Picketdesk stopped unexpectedly or ran into an internal error. View shows exactly what a report would send: where in Picketdesk's code the problem happened. A report is built to leave out file names, folders and picket titles, and View lets you check one before it goes. Choose Ask me before sending one (the default), Send them without asking or Never keep crash reports; Send and Delete act on one report, and Open folder shows where they are.